Airsoft Sniper Forum banner

400fps well l96

2395 Views 9 Replies 4 Participants Last post by  1tonne
First of all I am new to the forum and sniping, but not airsoft. I have a well l96 and am trying to get it to be under 400fps. It is not currently upgraded but I plan to get a 6.03 tbb and the aspuk hop up chamber (, ASPUK) this combined with the tbb, will probably give an fps increase of around 50-60 so what spring would I need? I was thinking a 120 or lower. Also where can I get one and are vsr springs compatible?
Thanks, GBM
1 - 2 of 10 Posts
L96s aren't compatible with vsr parts. A 130 may be under 400 after you were it in. Also you can get a 140 and maybe cut it.
About two coils. It varies form spring tro spring hough. Ask 1tonne, the "spring expert".
  • Like
Reactions: 1
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.