Airsoft Sniper Forum banner

A couple of questions about my UTG L96

1581 Views 6 Replies 4 Participants Last post by  acer34p3r
These are probably really newbie questions, but I'm just starting out on technical work on my gun. So all help is appreciated!

Question 1(about the hop-up):
There's supposed to be something on the black piece protruding out in front of the spring right? How much do they cost? What are the best ones?


Question 2(About the bolt):
Is there anyway to keep the screw pictured from coming loose? I'm afraid it's gonna come out one day when I'm not paying attention and I'll lose it. When I try to tighten it in all the way the bolt locks up.


Thanks guys!
1 - 1 of 7 Posts
Teflon tape the hell out of the screw, it's what I do. Keeps it tight, but still loose enough for the bolt to function properly. I have an issue with mine where when the screw isn't in far enough, I can't rack the bolt all the way forward, so about 5 layers of teflon tape solved it right away, because the teflon tape locks it in place with no adhesives.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.