Airsoft Sniper Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
451 Posts
Any drop in hpa cylinder that is centerline setup with the right length nozzle will work for you. It indexes by the cylinder head lugs, so if the body is floating free 10mm at the back end you'll be fine.

You can fix the shuttle stop pin by drilling & tapping a screw where the pin broke off fyi
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top