Airsoft Sniper Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
159 Posts
Your intention is to build the SR-25 into a sniper rifle,what is your fps goal?Im asking because the GB is going to be setup as a sniper GB,or so you say,but you want to share the lower with an upper setup as basically an assault rifle.If your fps is really high,most places will only allow you to fire in semi,and will demand select fire to be permanently disabled.Assault weapons are generally select fire.If you play with MED's you will run into a problem if your fps is high aswell.You will also need two inner barrels,and two hopups.

Its a cool idea,and could be made more practical if you had a GB with the quick spring change feature like an ARES,or if you had an HPA driven GB.Given the differences of the two types of rifles,it would be pretty tough to pull off your idea practically with a standard GB.If you were to try it,you would arrive at nothing more than an accurized rifle,and an assault rifle IMO.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top