Airsoft Sniper Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
824 Posts
Discussion Starter · #1 ·
I found this kit. I know I`m going to be like beat but here we go.
Brand new AC Co2 kit.
http://www.evike.com/product_info.php?products_id=37034
Is this a go or no go. Why?
I know it is Angel Custom but I actually like their parts. Not bad personally actually good. Not as good as your pdi and magic parts but this is a budget build.
Whaat would the consistency be. I live in California where the temperatures always nice.
 

·
Registered
Joined
·
189 Posts
This is just proof that Angel Custom is evikes new "house brand". Here is the same exact thing
http://www.evike.com/product_info.php?products_id=34473 Matrix
http://www.evike.com/product_info.php?products_id=37034 Angel Custom

Same exact thing, but a difference in price meaning they are starting to lean toward the Angel Custom name.
But, back on topic. I have heard of people getting close to 600 fps with .2.
I was thinking about getting this a while ago. Check out this thread:
http://community.evike.com/index.php?option=com_fireboard&Itemid=62&func=view&catid=134&id=122045&limitstart=60
 

·
Registered
Joined
·
571 Posts
flippin said:
This is just proof that Angel Custom is evikes new "house brand". Here is the same exact thing
http://www.evike.com/product_info.php?products_id=34473 Matrix
http://www.evike.com/product_info.php?products_id=37034 Angel Custom

Same exact thing, but a difference in price meaning they are starting to lean toward the Angel Custom name.
But, back on topic. I have heard of people getting close to 600 fps with .2.
I was thinking about getting this a while ago. Check out this thread:
http://community.evike.com/index.php?option=com_fireboard&Itemid=62&func=view&catid=134&id=122045&limitstart=60
Nope. It's PAS or, they ripped of the PAS design then.
http://shop.ehobbyasia.com/pas-co2-conversion-kit-for-aandk-svd-sniper-rifle.html
 

·
Registered
Joined
·
824 Posts
Discussion Starter · #9 ·
Problem is it says its a TM with a metal body but I don`t believes its a tm with a metal body. Actually I`ll make a new thread this went way to off topic.
 

·
Registered
Joined
·
824 Posts
Discussion Starter · #11 ·
Pale you can I forgot what the part was called but I`m pretty sure you can. But like shooting it with the co2 might be a problem. I don`t know how to explain.
 

·
Registered
Joined
·
909 Posts
Pale Blue said:
Timm said:
I have the Kit from WGC. Its constructed nicely.

May sell if anyone wants it.
Do you think it's possible to drill and tap the empty co2 canister to run external air?
I highly doubt it. It's not like a normal gas rifle that is easily tapped for CO2. It doesn't have a chamber of gas, the CO2 canister goes inside the bolt and it runs off of unregulated CO2. When the spring strikes, it lets out a tiny bit of unregulated CO2. The 12gram cartridge acts as the gas chamber.

This is hard to explain, but it most likely just wouldn't work. I read a thread somewhere a while ago about tapping a CO2 pistol that works off of the 12 gram cartridges just like this.
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top