Airsoft Sniper Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 · (Edited)
Well, instead of spamming the forums with my questions, I thought, why not just do multiple questions in one post? So here it is.

My first question is with the hopup chamber. What is the difference between THIS and THIS?

My next question lies with X-Fire.org. I am getting a 6.04mm 495mm with a 10mm outer diameter TBB made by PDI. The chamber link HERE, says that "you find the silver ring in front. Please detouch if using PDI 04". I'm assuming if you are using the PDI 6.04 mm 495mm TBB with a outer diameter of 10mm, you take that ring off? Correct? I have no idea.

Please help! Thanks!

-Sergio

PS- The quoted quote is not my spelling. It is really what the website says.
 

·
Registered
Joined
·
218 Posts
You probably want a 6.03 they are the best from what I am told. the silver ring comes in the hop up, when you get it simply pull it out slide it over top your barrel. Now slide your barrel plus the sliver ring into your hop up and there are grub screws that screw down onto that silver ring to keep your barrel in place.
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #3 ·
You probably want a 6.03 they are the best from what I am told. the silver ring comes in the hop up, when you get it simply pull it out slide it over top your barrel. Now slide your barrel plus the sliver ring into your hop up and there are grub screws that screw down onto that silver ring to keep your barrel in place.
Thanks! Also, I prefer the .04 for the range. I mean, it wouldn't be that much of a difference, but also it'll save me trouble because the 04 is 495mm. Basically the exact length it should be :) so I don't need to add anything to cover the inner barrel if I get a 509 or something.

They also don't sell a .03 for Type 96 guns with 495mm :(
 

·
Registered
Joined
·
1,159 Posts
Yeah, X-fire is PDI's official website, but they're English isn't great.

basically the 6.04mm barrel has a thicker wall than the others, so you need to remove the piece in the chamber for it to fit.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top