[Masterjuggler98]

If you want to get the good stuff I would go with the trigger. It looks like an exact clone of the LL one but I have never used the LL one so I can't say for sure. It has been working perfectly for the past few months now for me. The only issue is you have to file/sand the sides of the spring guide stopper to get it to fit but that only takes a few minutes. I also have a perfect air seal with the piston that comes with it so that's a plus.

 

[Masterjuggler98]

Any spring guide meant for VSR rifles will work. You can keep the plastic spring guide and have the same performance because the upgraded guides only give more durability. The ball bearing guides are supposed to release some spring tension when uncompressed but I'm not sure how well that works considering the piston can rotate if needed.

 

[Masterjuggler98]

You just have to saw or file off the little thing that holds onto the T shaped holder in front of the stock trigger if that makes sense. You want it to rest flat against the z-trig. I can take a pic later if you want.

 

[Masterjuggler98]

The piston gets me a perfect air seal. With a brand new m170 spring I can hold my finger to the tip of the barrel and pull the trigger, wait five minutes, let go and feel a blast of air come out. i'll get that pic soon, sorry for being a little late. I've got to find the sd to usb adapter. I use it constantly and now I put it somewhere safe, it's very safe now.

 

[Masterjuggler98]

Cheese said something about an AA trigger breaking on him or hearing about it breaking or something like that. Besides a sping snapping, which will happen eventually because those small springs don't last forever, I don't see how one of these triggers could break unless they were using it to break rocks LOL.

 

[Masterjuggler98]

Well I guess you can't have every single one in perfect condition. Anyway, I should get that pic up tonight. I'm busy at the moment so sorry for getting it up late.

 

[Masterjuggler98]

Well of course I can't find that stupid sd to usb adapter to get the pic on here, but I did find this: http://mysite.verizon.net/res0cvsb/Airsoft/M-Trig/triggard01.jpg

It's not my pic but that's what it should look like. You can even cut it down a little bit less if possible. You want it as flush with the trigger box as possible.

 

[Masterjuggler98]

I also saw it on ebay for the exact same price, although of course you can't use the ASGI coupons on ebay. I don't know if it is in stock there but if you don't want to wait you could get it there.

 

[Masterjuggler98]

Well it is a necro post, but now you got me curious; how is the AA better than the LL?