Airsoft Sniper Forum banner
1 - 1 of 27 Posts

· Registered
72 Posts
I would like to second(or third?) using the JG bar-10 lever in the TM. I compared the arms side by side, and the JG "prongs" are indeed about 1mm to 1 1/2mm longer. With the current spring I have in there(500-550 fps), I could not overhop a .36. I swapped the arm and now can overhop with the arm 1/3-1/2 on. No loss of accuracy what so ever.

1 - 1 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.