Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
192 Posts
I may have missed this so forgive me if my weekend eyes failed me!

Currently using an AA cylinder, Springer Custom Works piston and guide, and an Edgi 430mm barrel. Now, for a 6.03mm barrel, the guideline weight is .43g but mine is actually a dual bore barrel that runs from 6.03mm to 5.98mm....and I use .48g BBs. Now, I have no issues generating hop, and accuracy/consistency is quite acceptable but I'm always looking for more......and I would guess mine is more than slightly over-volume......

So how much difference will a switch to a different weight actually make, and in the words of Paul Harrel "Is it enough difference to make a difference"?
 

·
Registered
Joined
·
192 Posts
It was certainly a factor in my choice of barrel but as I said, I do wonder how profound any differences might be.
Not sure on how the barrel is split but it looks roughly equal without a fiddly measurement....I suspect I shall grab some other weights for science before too long.
 
1 - 2 of 2 Posts
Top