Hello everybody, I am new here. I need some help with my Aftermath Dragunov. So, I got it for $50 dollars brand new on eBay. But when I got it rained for like 2 months straight almost. When I finally got to shoot it worked fine and I played a couple of games with it. Then the mag stopped working the winding wheel wouldn't feed BB's. Didn't use the gun for like a couple of months and then decided to fix it. Took it apart and now I have to spin the wheel like "A LOT" but the BB's eventually get to the top. Or I can stick my finger in the mag and spin one of the gears and they come to the top right away. So, I thought I fixed it for the most part and went outside to shoot it. Now it won't shoot a BB unless I flip it upside and pull the slide back. I took the gun "completely apart". Air nozzle looks fine, hop up bucking looks fine, and everything looks fine. The only thing is Maybe it is the bucking rubber? I took it and cleaned it but I don't know what a bad bucking rubber looks like. Can somebody a pic of a bad one vs a good one? Sorry I would post pics But just put the gun back together. Any help is greatly appreciated
Aftermath SVD Dragunov
1 - 3 of 3 Posts
Joined
·
5 Posts
Sounds a bit more like a magazine issue than something to do with your rifle. I've never seen a high-cap magazine taken apart but it almost sounds like the winding wheel isn't engaging the internal gears? Or that there's not enough pressure in the spring to force BB's out of the magazine? If they still load fine when you flip it upside down then I would make the magazine my number one suspect. Mine had a tendency to not feed well either if it was more than half empty so make sure it's nice and full too.
Just a note, make sure you go leave an introduction in the new members section too.
Just a note, make sure you go leave an introduction in the new members section too.
1 - 3 of 3 Posts
