[Steels]

After scouring the internet for a while, I finally found a guide to taking apart probably the cheapest VSR10 clone on the market, and my current gun of choice. The guide is written by a guy who's had experience with AEG tech, and he installed a modified AEG barrel from the looks of it, but the guide itself is nice to have. So, in case anyone else has bought the rifle like myself and is missing a guide to taking it apart, here you go:

http://www.airsoftct.com/forum/viewtopic.php?f=14&t=8649

 

[king..kranium]

Check this out... http://www.airsoft-barracks.com/forums/topic/716-tcfs-agm-mp001-modifications-guide-and-discussion-thread/
A better guide IMO.

Sent from my MB870 using Xparent Cyan Tapatalk 2

 

[Masterjuggler98]

Looks to me like this is the same process as with all vsr clones, is it not?

 

[king..kranium]

Yea. The only difference is there is an extra screw in our hop up. (For dissasembly). And the threaded outer barrel

Sent from my MB870 using Xparent Cyan Tapatalk 2

 

[Steels]

Not to mention a slightly different way to remove the cylinder, and to remove the cylinder head in comparison to the TM version.