Airsoft Sniper Forum banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
716 Posts
Gentlemann said:
I'm looking to modify my guarder selector plate to work in Semi-only, I read the selector mod guide but didn't find any answers. Could i get any assistance?
I'll strip down my AK over the weekend and see what I can do for you. Usually selector plate mods are fairly simply, just involving the removal of a small portion of the plastic that comes into contact with a spring mechanism. Your other alternative will be to put in a mechanical block on the selector switch itself, which would be extremely easy on an AK.

Like I said, I'll strip my down over the weekend and hopefully have a solid answer for you.
 

·
Registered
Joined
·
69 Posts
A simple way to achieve this, is to leave out the whole selector plate, and solder the contacts together that are located under the selector plate, on the left side of the trigger assembly. This way you will have Semi, while having a functioning Safety aswell. just assemble the gun without the Selector plate and you're done. But don't forget to solder those contacts.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top