Airsoft Sniper Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Hi there. To get the barrel out you need to disassemble allmost the rifle completely. When the outher barrel has been removed from the rifle you need to remove the hopup unit housing. Its kept in place with 2 small screws. After removing those two screws you can remove the housing and you have acces to the hop up unit. Now you need to remove again two small screws from the hopup unit to get acces to the barrel. Hope this helps you out.

See also my attached picture ( maybe abit unclear )

 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top