Airsoft Sniper Forum banner
1 - 5 of 10 Posts

Duesrax

· Registered
Joined
·
47 Posts
Discussion starter · #1 ·
So I recently acquired a BAR 10 from a fellow player at a local operation and decided I want to upgrade it. After lurking for about a month here, I think I have an idea as to what parts I need. I am still unsure about some though.

Hop Up and Barrel
Action Army Hop Up Chamber (Bought from AirsoftGI)
Maple Leaf 70* Nub (Bought from Evike)
Prometheus Flat Hop-Up Tensioner Set (Bought from BrillArmory)
PDi 6.05 430mm Barrrel (Bought from X-Fire)
PDi Barrel Spacers (Previously Bought from X-Fire)
(Is this combination of bucking and nub good?)

Durability Parts
Action Army Zero Trigger w/ Corresponding Piston (Bought from AirsoftGI)

Parts I Need Help Choosing
Type of Cylinder
Type of Spring Guide
Type of Cylinder Head
Type of Spring

If you can find a better store to buy these parts from, that would be amazing. I know x-fire is the best for PDi parts but usually buying parts from sites like ASGI and Evike is discouraged. Also posting links for the parts I need help finding would be great.
 
Discussion starter · #3 ·
-Stick with the stock cylinder. It is good and will last a long time. If you are after a better cylinder, then try the Action Army Teflon Cylinder
-Get a cheap as possible metal spring guide as they tend to last for a very long time.
-Stick with the standard JG cylinder head.
-Spring will depend in the fps you want. What FPS are you after?
The limit at my field is 550 so I guess that's what I want to hit, right?
 
Discussion starter · #5 ·
Spring would be about an M170.
I would advise using a bb weight between 0.4-0.43gm as well. Cheers
Bit late, but do you have any recommendations on brand and where to buy said brand?
 
Discussion starter · #7 ·
I normally get Laylax but I have also got some cheap mag springs before too from WGC. The downside with springs is that the cheap ones often don't stay strong for a long time.
My bad, I probably should have specified. I meant BB.

Sent from my XT1058 using Tapatalk
 
Discussion starter · #10 ·
Thanks for the help guys, but what I really need is a good brand of .40 or .43 BBs

Sent from my XT1058 using Tapatalk
 
1 - 5 of 10 Posts