[33073]

So I want to buy bar pro sniper or gspec and cant choose one.
So what are pros and cons of both of them.:shrug:

 

[BuMS]

Pro sniper
Pros: Length. Good cylinder to barrel air ratio.
Cons: Length...

G-Spec
Pros: Length. Nice and short, easy to maneuver.
Cons: Length. Less barrel to accelerate the BB.

 

[33073]

I mean im buying for tuning, and u said length in every category:tup:
Btw is inner barel changable in both of them? i mean so i can put ex. 500mm in both.
Does every vsr part fits on these guns?

 

[1tonne]

Get the G-Spec.
A silencer on the and of a VSR can work wonders if done right. I took the normal G-spec silencer off and put on a 335mm long one and it is quiet as. But even the normal G-Spec silencer is OK.
The Pro version can still fit a silencer (with an adaptor) but then it looks ridiculous and is miles too long.
The Pro version when stock has higher fps but that is only due to the longer inner barrel. You should be swapping the inner barrel out on both versions to suit the bb weight you are using anyway.
So get the G-Spec.

 

[33073]

Do i need adapter for silencer if i buy 500mm inner

 

[1tonne]

Not if you get the G-Spec. The G-Spec can take up to 500mm. Any longer and it will stick out the end of the silencer.
NOTE: The 500mm long barrels are best for 0.36gm bb's. No heavier.

 

[33073]

So it will fit the silencer right to the end. Will it(silencer) be fake then? Couse i dunno how it work. And if i buy 330mm silencer can i take longer varrel

 

[1tonne]

With a 500mm inner barrel the silencer effectively just becomes an outer barrel and no longer a silencer.
It can also take a longer silencer which will mean you can use a longer barrel but longer inner barrels are not that great.
What is your club fps? I may be able to advise you on what to get.

 

[33073]

Im thinking of 0.36 ~480-490 fps and 500mm aa innel 6.03

 

[33073]

So what u can say

 

[1tonne]

You are on to it. That is about right for 480-490fps.
Use an M150. That should be about 520fps when new but come down to about 480-490fps when worn in. When new, wrap solder around the piston (Hold it on with electrical tape) to slow it down and then remove it once the spring is worn in.

 

[33073]

Will i get a good range? Couse maybe i should take heavier bbs and more fps but then shorter barrel whichis louder

 

[1tonne]

The average AEG is shooting about 55 meters. You should have about 70-75 meters.

 

[mistermist]

I would go for G spec and go with heavy ammo and shorter barrel, but we have higher fps limits than 500. As indicated you can fit longer barrel in silencer if that is wanted, G spec looks nicer as well

 

[33073]

So i better get myself a short barrel instead of 500mm? 430 or shorter? And what weight of bbs u prefer

 

[1tonne]

If you are going to use 0.36gm bb's, get the 500mm inner barrel. If you are going to use 0.4gm, get a 470mm inner barrel.

 

[33073]

Maybe a heavier bbs? But which weight is flying the longest range?