Airsoft Sniper Forum banner

Barrel cuts?

1340 Views 4 Replies 3 Participants Last post by  Cheese Man
Okay I was wondering of anyone could explain/show the difference in the barrel cuts... Aeg, vsr10, and aps2 ...

Sent from my MB870 using Xparent Cyan Tapatalk 2
1 - 1 of 5 Posts
So, the difference is just in where the little grooves are.

I can't take a picture for you, but the VSR for example, has a ring cut into the barrel right after the hop cut. The AEG, had just the one groove going down the bottom of the barrel. The APS-2 cut has a groove down the top and bottom of the barrel (top being the side with the hop cut). Generally when I do barrel cuts I recommend that the client just sand down their buckings so I don't have to do the little grooves (they are a real pain, and can get very difficult to do right).
  • Like
Reactions: 3
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.