Airsoft Sniper Forum banner

Barrel Dimensions help

1574 Views 8 Replies 5 Participants Last post by  fuzzywolly
I am doing to be getting a prommy barrel to go into a PDI chamber on a well mb05. My question is will a 500mm barrel fit in it without sticking out? Also if it doesn't than I can either get a 455mm 6.03 for 75, or a 420mm 6.03 for 60. I don't think the extra 35mm of barrel for 15 dollars is worth it. Help me out here.
1 - 2 of 9 Posts
JBU barrels come in 500 mm length for regular AEGs, not to mention you can just drill out the endcap and use a 509.

I recommend getting as close to the stock length as possible.
By the way, just being nitpicky here, but Type 96 barrels are 495 mm long, not 499.

The easiest thing to do is to get a 509 mm barrel, and just leave off the endcap, and put a barrel extension hider, or something on it.
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.