Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hi guys, I'm building my hpa rig based on vsr clone. I already purchased mancraft sdik and AA hop chamber. My doubt now is on wich barrel would fit well. Based on your experience / results what barrel may I buy?

I heard about crazy jet but not sure what length /diameter will work well with HPA.
Also I have edgi route but long waits kill me.

Another option is a mad big bore (don't remember brand) about 6.30 or so. Some guys claim to be best for hpa.


As you can imagine it's my first hpa and not sure about this fine tunning stuff.

Thanks!!
 

·
Registered
Joined
·
188 Posts
I would look into the Esc works 5.98 barrel. It's nearly identical to my edgi but at half the cost. It will lower your psi needed to get higher fps results saving air. From my experience tighter also = better. Also remember longer barrel with hpa equals more fps so keep that in mind.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top