Airsoft Sniper Forum banner

BB a new problem on an old topic

1154 Views 13 Replies 5 Participants Last post by  arcticd
Hello there. I have just joined you, but I am a very old reader. I had memorized this forum before I got into this sweet trouble. Now, I would like to get rid of the old topics and ask you a question again.

I have SSG10-A1. I'm going to wear an m170 spring for this girl. How many grams of bb should I use? The snipers in my team use 43 gr. When I ask the service, they say take 45 gr. Can you put an end to this indecision I entered for 0.2 gr? Thanks
1 - 2 of 14 Posts
Yeah heavier is almost always better, especially at high energy. I wrap mine in solder and then put a few layers of electrical tape to hold it on. At about 60g, it increases .48g bb joule output relatively substantially.
Fps rings work, but they dont add weight. They basixally jusy make the spring under more tension (like getting a bigger spring). Heavier pistons sre more efficient.
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.