Airsoft Sniper Forum banner

BB Quality and how it can Affect a Gun

4674 Views 18 Replies 9 Participants Last post by  spellisaac
Today I ordered my first rifle from Airsoft Megastore, and after the order was completed the site recommended a couple of videos on BB quality and how low-quality BBs can damage your internals.

From these videos I've learned that seamless BBs can be misleading in their construction, and that many retail store brands are practically polished seamed BBs. Obviously, this can increase the chances of breaking and screwing up your gun. I bought an AGM VSR10, and at the moment I have three quarters of a 5k box of Crosman .20s. After testing one with a pair of pliers, the BBs are seamed but polished. Should I be worried about the BBs breaking inside of the gun because of their quality, or does the bolt action prevent this from happening or lower the chances of BB breakage? Should I look into investing in high quality ammunition before I use a single Crosman, or can I spare some time before I order new ones?
1 - 2 of 19 Posts
On the topic of weight, if this gun fires at a theoretically consistent 420 fps, then what is the highest and/or lowest functional BB weight I could use?
With a well adjusted hop-up, 0.43g.
If you like BB's getting to your target faster, then you can use 0.43g :hehe:.

Inertia/momentum allows heavier BB's to travel faster than lighter ones after a certain distance (i.e. 100ft+, sniper distances :yup:.)

1 - 2 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.