Airsoft Sniper Forum banner

bearing spring guide keeps breaking?

1962 Views 4 Replies 3 Participants Last post by  hoggie
Hey, I have a custom upgrade snow wolf m24 with all aps2 upgraded parts.

I had a modify 7mm in there which I found out was wrong for the spring, after that one broke(the little copper piece that holds the bearings into place literally broke in half) I got the correct 9mm one that was the right size for my spring. I was shooting it today and the same thing happened. My gun is running a laylax sp190 spring has a modify copy of the lalax 3 element piston. Whats causing this? Has anyone had a problem similar to this? Am I just cheaping out on the spring guide? Please let me know I would really appreciate it. Thank you for your time guys
1 - 1 of 5 Posts
What do you mean by dropping? I'm assuming thats the spring guide stopper, but what kind of trigger is it out of? And youre assumption stated above me is probably correct. You should attempt to align it right :)
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.