Airsoft Sniper Forum banner
1 - 20 of 24 Posts

Registered
Joined
1,384 Posts
Discussion Starter · #1 · (Edited)
UPDATED 01/29/2022 with Vsr-10 Cylinder Guide Sleeve DIY Version 2

Hey there! This thread for a few DIY videos that I have made. Links don't always work on here so the video guides can be found at:

YouTube.com/BlindSniper in the DIY/Tutorials section!!

Feel free to post up some of your video guides as well, as I'm always down to learn about some nifty mods! As of now there are video guides on my channel for the following:

Vsr-10 mag pulls
Internally suppressed barrel
Mask fan to stop fog
Straight pull mod for Wolverine E Bolt
How to make piston weights for your Vsr-10
TDC mod for a Vsr-10 (scope turret)
How to make a carbon fiber outer barrel
Cylinder guide sleeve v1
Carbon fiber Banana
How to dye leaves for a ghillie
How to make a hi-cap Vsr-10 magazine
Ejection port cover mod
Magazine mod to help with engagement
How to make a sniper rig
How to build a Vsr-10 from COMPLETE Scratch!!
How to refocus a 90mm zoom cam/scope cam
How to add a charging handle to your hpa Vsr-10
Cylinder guide sleeve v2
more to come馃嵒

As I mentioned, the forum sometimes has issues with imbedded links, but my DIY playlist is linked below!

https://www.youtube.com/playlist?list=PL36zvkqxUO1HrraNI7C6OJYi0MTBZVyRi
 

Registered
Joined
1,384 Posts
Discussion Starter · #6 ·
I hate to bump my nooby channel, but I finally finished my Vsr-10 scope turret TDC mod guide!! If you have 12 minutes of your time, please check it out and let me know what you think!
 

Registered
Joined
5,711 Posts
I tried to make a high cap VSR mag years ago. This is a much better way. This should be stickied as it is something that anyone can do and it is a good idea. Well Done BlindSniper
 

Registered
Joined
1,384 Posts
Discussion Starter · #10 ·
I just threw together a video guide for an ejection port cover. Mine is literally just a COVER that's easy to make. It is NOT the internal sleeve made from a soda can, as I make my guide sleeves differently!!
 

Registered
Joined
1,384 Posts
Discussion Starter · #12 ·
A mid cap should be possible. You have to do quite a bit of shaving but the mid cap feed track is different. It shouldn鈥檛 get in the way though. I can see why you hate hi caps, I despised them when I got into airsoft. But I learned to love them since it IS only airsoft. But the hi cap for my vsr-10 was an easy exception because it was made specifically for one of my rifles. Making multiple might be awkward to carry! Let me know if you attempt it with a mid cap!!
 

Registered
Joined
217 Posts
I saw your videos. They're awesome, keep up the good work man!
 

Registered
Joined
217 Posts
Thank you! I plan to do a video soon of "how to make a sniper rig" showcasing the setup I use and how I threw it together!!
That would be very helpful.
 

Registered
Joined
1,384 Posts
Discussion Starter · #17 ·
It's that time where I bump this!! Latest video took me a bit to make but hopefully it helps someone!! It's a guide on how to build a vsr-10 from absolutely nothing!!

There are a million parts and a million ways out there to assemble, adjust and tinker with a Vsr-10. My video covers the basics and has a bunch of little tips I learned over the years!! Enjoy!! Link might not work but my YouTube channel is Blind Sniper :shot:

 
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top