[Beaver1216]

Tried sniping out for awhile stock and loved it so im deciding to put my first build together, just wondering if my mods will be fully compatible together before i pull the trigger to order them, mainly the ML trigger with the AA parts. Any help much appreciated as a newbie
Build list:
-Maple leaf 90° zero trigger set (90°piston/maple leaf spring guide)
-AA hop up chamber (damping version)
-AA g spec inner barrel spacers
-AA hop up bucking
-AA M150 spring
-Running stock cylinder and barrel (will eventually be upgrading)

 

[BlackDogAirsoft]

The ML trigger and cylinder parts are not very good.
I would suggest the S trigger, Bull Trigger, or Action Army trigger over them.
With the piston, I would go for the SCW one or Action Army. I would use a Rapax spring. Make sure to get a spring guide which fits the Rapax spring (13mm).

 

[Sodium]

I like laylax and wasp pistons. They seem to just work with everything pretty well.

 

[Blackmail]

The ML trigger and cylinder parts are not very good.
I would suggest the S trigger, Bull Trigger, or Action Army trigger over them.
With the piston, I would go for the SCW one or Action Army. I would use a Rapax spring. Make sure to get a spring guide which fits the Rapax spring (13mm).

I and @Blind Sniper can vouch for the bulltrigger

 

[Beaver1216]

Hey guys thx for the inputs, I ended up going with my original build list as my local shop didnt have the other parts But ill definitely look into them after the ML stuff breaks eventually) anyways i finished the build today with all parts plus teflon around the cylinder threads and bucking. Very consistently chronoing at 500fps with .20g. Sound about right?

 

[RonSwanson]

Hey guys thx for the inputs, I ended up going with my original build list as my local shop didnt have the other parts But ill definitely look into them after the ML stuff breaks eventually) anyways i finished the build today with all parts plus teflon around the cylinder threads and bucking. Very consistently chronoing at 500fps with .20g. Sound about right?

Shouldn't need teflon tape on cylinder if I ring is lined and in good condition.

Also 500fps with .2 means nothing, need to test with in game weight and check joules.