Airsoft Sniper Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi,

i wanne build a high end costum vsr.
my budget is around 800-900 euro.

Is this build from Clean shot any good?
 

·
proverbial discord mod wannabe
Joined
·
1,065 Posts
Where are you from?

Wysłane z mojego KB2000 przy użyciu Tapatalka
Pretty sure he's from Germany unless he is using a VPN, as the flag of the country you are in is shown on the asf website.

Cleanshot's build is pretty good.

Here's a high end vsr10 build:

Maple Leaf Bull Barrel
Maple Leaf Reciever
Maple Leaf bubble top rail
Springer Custom Works S-Trigger (standard version, not budget)
Springer Custom Works Piston and Spring Guide
Rapax Spring
Action Army Teflon Cylinder
Maple Leaf Stock
Lambda/Lonex/Crazy Jet Inner Barrel
Action Army Hopup Chamber
Tridos 2.0 TDC mod for AA hopup chamber
Rhop or Maple Leaf bucking


Also, it might be a good idea for you to make an intro post. This is considered good practice on this forum as it lets us get to know you and perhaps quickly resolve any problems that you might immediately have.
 

·
Registered
Joined
·
1,607 Posts
Alright, here's my suggested build list
Decent FFP low powered variable optic scope
Bulltrigg scope rail
Bulltrigg one piece receiver
Bulltrigg bolt handle
Lambda 90° 13mm cylinder set
TTI 90° trigger
Action Army hop chamber
SS-arm (see my tutorial)
R-hop (Snipetor or Elvishtac)
Modify SORA R-hop bucking
Lambda or PDI 6.01X380mm barrel(may have to cut a 430 and re crown the end)
Painters tape barrel spacers
Maple Leaf S1 or S2 stock
Novritsch SSG10 magazine block
Novritsch SSG10 screw set

And I think that's it, probably just work on nozzle length and do other small mods here and there as you discover them
 

·
Registered
Joined
·
638 Posts
Alright, here's my suggested build list
Decent FFP low powered variable optic scope
Bulltrigg scope rail
Bulltrigg one piece receiver
Bulltrigg bolt handle
Lambda 90° 13mm cylinder set
TTI 90° trigger
Action Army hop chamber
SS-arm (see my tutorial)
R-hop (Snipetor or Elvishtac)
Modify SORA R-hop bucking
Lambda or PDI 6.01X380mm barrel(may have to cut a 430 and re crown the end)
Painters tape barrel spacers
Maple Leaf S1 or S2 stock
Novritsch SSG10 magazine block
Novritsch SSG10 screw set

And I think that's it, probably just work on nozzle length and do other small mods here and there as you discover them
Are we sure we want to stick with the TTI trigger? There hasn't been enough said about it IMO to warrant picking it over other options on the market.
 

·
Registered
Joined
·
1,607 Posts
It may not have been proven, but it's a combination of the Bulltrigger with the drop down sear and the SCW with the roller things, so it's pretty much a superior trigger, on paper.

That being said, Bulltrigger and SCW are the kings right now, but this seems to be the best option if you feel like paying a bit more.

But, I'm not touching my Angel Custom Alpha trigger until it breaks, and I rarely even use that gun as the main VSR I use is a Wolverine BOLT that never needs strength.
 
1 - 11 of 11 Posts
Top