Airsoft Sniper Forum banner

Building a Race Pistol.

11888 Views 35 Replies 10 Participants Last post by  nelsonho396
Kind of pointless for me because I can`t find any shooting competitions near me but its get for training, looking bad A, and I`ll try to start some between friends.

So of course as the title says I`m building a race pistol.
My base pistol is a 1911 Hicapa by KJW which is amazing. Sending bbs 160 feet easy.

Tell me what parts would be the best and what would work great. I need it too look bad A too.

Okay things I`m going to start doing in order of when I`m going to do it.
1.Tune the sear and hammer set for short trigger pull (DONE) Also engraving my name on it lol (Done)
2. Cut the barrel and port it. Glock style( Will do tommorow or yeah...)
3. Cut a prototype slide design. Heavy ported. Getting ideas from Lazouche. Going to be a TM stock slide.
4. If all works properly. Short stroking with go in progess. If it works majestically. Will be switch to a metal slide.
5. Metal slide will be ported.
6. Rail mount and a red dot will be acquired. Along with a new handgrip, IPSC looking screws, Magwell maybe... , and a charging handle.
7. After funds are up. I will sell my l96. Get a snappier bbh and loading nozzle and light weight sears.
8. Get accuracy set up.
9. Training.
10. Field it train and pwn.

Tell me what part I should get that you reccomdend and if this would be nice. Thanks for reading and helping.
As you can tell I like working on pistols alot.
1 - 1 of 36 Posts
I've built a TM Hi capa race pistol...
TM Hi Capa 5.1 base
ProG4 IMM slide
ProG4 IMM steel barrel with gold finish
ProG4 SV frame
ProG4 steel recoil rod
SD real grip
SD magwell
Nova grip safety
Nova ambi safety
Nova slide catch
Airsoft surgeon SV trigger kit
SD POM nozzle
King Arms recoil and hammer springs
ProG4 carbon mount base
ProG4 thump rest
ProG4 sears
C-More red dot (replica)
PDI 6.01 6inch barrel
Nine ball bucking

In pictures there's not the AS trigger and the thump rest and I'll have to change the hammer... I've a ProG4 hammer with the SV logo on it but it's hell to install and I'm bored to do it...
It takes too much money to built(mine took over $1000) and time to tune it.
The slide speed is phenomenal!!
I want to built one some day for skirmishing with open sights and no compensator of course...

Nice Wolf!! Could you send me a pic? I plan on building a 6" custom hi capa but I don't know too many people that have used a 6" slide with a 6" LDC lower receiver before. I have a list of all the parts I know will work but the only issue I am having is finding a recoil spring for it. I was thinking of using a stiff spring for the 5.1 or using a special short stroke spring for the 5.1. Would that work?
Also I was thinking in the near future to build a 4.3 but I was only going to do it if I could get my hands on a gold finished outer barrel. I found one made by AIP but the trades are horrible and the gold finish is to vibrant. Any ideas where I can get a 4.3 gold outer?

- Topa
1 - 1 of 36 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.