Airsoft Sniper Forum banner
1 - 1 of 1 Posts

· Premium Member
602 Posts
Everything looks good and will fit, including the IS piston head, EXCEPT for the spring guide. You will be able to use the stock cylinder head with the cylinder, too.

The M24 comes with a metal spring guide, and doesn't need to be replaced unless you plan on using a 9mm spring as opposed to the stock 7mm spring.

I see you have an APS cylinder selected, keep in mind you'll need an APS bolt handle too, which you have listed. PDI also makes APS cylinders, which work, but the Laylax will have significantly easier bolt pull on it, due to the teflon coating.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.