Cali' R700

1453 Views 2 Replies 3 Participants Last post by blackfoot1, Feb 22, 2011

heartwins847

Discussion Starter · Feb 21, 2011

After Long hours of work, and DIY, she's about to be finished.
Upgrades:
Laylax Z-trig
PDI Raven 6.01 barrel
Laylax Orange 90* piston
ASGI sp170 spring (soon to be replaced)
ASGI spring guide (it sucks, the chrome/metal parts flake off after long use, will be replaced by Laylax spring guide)
Nineball Hard Bucking
Polar star high flow cylinder head
Sling of one my paintball gearbags, super comfortable

DIY:
Sawed off airbrake
Floss wrapped bucking (10x better than teflon tape, IMO)
Barrel spacers
Sun shade for scope
Clay stock mod (play-doh)
Filed down ribs for a better fit on magazine
Failed digital paint job, that surprisingly turns out, it blends perfectly with the dry scrubs and canyon brush

She eats bioval black and white .30s. For range, I'm not really sure, but I did have 4-5 confirmed hits from about 250-275 ft away (guesstimate). I have about 3-4 things left to buy on this rifle.

All opinions are appreciated

Jack

See less See more

Save

1 - 3 of 3 Posts

inthetallgrass

· #2 · Feb 21, 2011

The barrel looks like you put glue on it and threw dust on there. That looks quite cool, I like it. The scope's ribs look good too but I don't like the look of the scope without turrets. overall the gun looks very well and should shoot well considering the hardware you put in. Also please enlighten me on this floss wrapping bucking and play-dough mod. I have heard of a silencing play-dough mod if that is what you are referring to. It also adds a lot of weight to the gun to make it more realistic. (Check out my guns!(Previous two posts))
Lastly do you mind me asking what all the medals are for since you showed them off

(Kidding of course)

Save

blackfoot1

· #3 · Feb 22, 2011

inthetallgrass said:
Also please enlighten me on this floss wrapping bucking and play-dough mod. I have heard of a silencing play-dough mod if that is what you are referring to.

I'm guessing he means "whipping". You tie floss/thread around the hop bucking instead of taping it, claimed to give 100% air seal.
Check Vindi's "Holy Grail" thread in the long range AEG section for a guide.

Great paint job by the way.

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month