[bottoms94]

I can't take apart my utg l96. The barrel will not seperate from the stock!?!?!? What the heck is wrong with it?

 

[Hawkey3]

There are two screws on the bottom of the stock you have to loosen up in order to disassemble the upper receiver from the stock. Then the barrel should unscrew from the receiver. Here is an in depth guide.

http://www.airsoftforum.com/board/L96-upgrade-disassembley-t156035.html

Sent from my DROID RAZR using Tapatalk 2

 

[bottoms94]

I know that, but i got it. the screw at the trigger is striped.
Thank you though.

 

[fuzzywolly]

Had this issue, had to dissemble the actual stock to get to the receiver and had to realign the screws as they were slightly off centered which prevented being able to unscrew while the entire gun was together.

 

[bottoms94]

Yeah, I kinda had to pry it apart >.<. Rifle is fine, but I don't like having to do that.