Airsoft Sniper Forum banner
1 - 8 of 18 Posts

· Registered
Joined
·
571 Posts
What BB's does your field Chrono with? There's a difference in energy between 500 with .2s, .25s and .3s. 500 with .2s is 2.34J, .25s is 2.92J, and .3s is 3.5J. I cannot consciously help you without knowing what energy limit your public field is set up for out of the nature of safety alone.
 

· Registered
Joined
·
571 Posts
Joules Is KE=1/2M(V*V), how ever, the mass is in kilograms, and the velocity is in M/S. Airsoft Weights in this equation is like .000X. Ideally for that power level, he'll want to be reaching 416FPS with .29 SGMs. He can vary that depending if he wants to use different weight BB's, but I'd personally be using .27 Biovals, .29s SGMs, .3 Biovals, or maybe G&G .28s if I was using a DMR, but accuracy is key here, so I'd leave that for a last ditch ammo source. Does he have a budget, if so, what can he spend?
 

· Registered
Joined
·
571 Posts
Meh, people complain about the .27s being too hard but if you play within the ratings of your eyewear you should be fine. At this point, I'd recommend a JG M16 Enhanced, should run him around 150-165 by the gun itself at the time, or an ICS Sportline M16A3, both can be solid platforms.
 

· Registered
Joined
·
571 Posts
Do you know how many broken KWA 2GX boxes I've seen? Lots. Same with the gears. They're only good stock? Just like Mac computers. KWA hasn't done anything innovative to impress me with AEGs. The only thing that's actually somewhat impressive is to make a more reliable FF 2-F HU.
 

· Registered
Joined
·
571 Posts
G&P internals are crap so that explains that. CA is more off-spec than KWA, G&Gs I've had trouble with the piston rails, but sanding helped with that. I do very much like their Gas weapons, however, something always goes wrong with them upon release.
 
1 - 8 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top