[Razinger]

Will a 240mm spring replace a 200mm spring work? I can't find any TM L96 AWS compatible springs that will shoot 500 fps and I want to make them at least +-495 <= 500 FPS.

 

[Razinger]

As long as it fits into your cylinder and is still under compression it should be fine.

Ah great! The laylax springs I have been looking at and other springs are longer than the stock spring I have and all have the same 13mm outside and 11mm inside. I wasn't sure what spring to upgrade from one of my MB4410 threads, but now I am good to go! Thanks

 

[Razinger]

Well have you already chronoed your rifle? I don't think having a pro version matters :shrug: but it depends on the person. As from the guide I suggest slowly 2 coils at a time and slowly working with it from that point. Spring is not something you would need to really worry about until after you have acquired the appropriate hop up upgrades and possibly trigger unit upgrade.


Razinger | The one, The only..