[headshot06]

Classic Army M24 M40A3 USMC Camo - Updated with Cheek Pad

Hi guysss, I use m24 classic army with pdi internal for this project,
And i use solid wood that i carved for the stock to copy the M40A3 USMC*stock.
I hope you guys like it.

Previously

In progress

Final

 

[headshot06]

Hi guys, thanks for all the comments, really appreciate them.

@Bengreen: recently i also bought vsr, what i can say is the overall inside body is much more complex than ca m24, and i'm planning to built the same stock with vsr base, so meanwhile i cannot give you any tips regarding vsr stock. Just make sure you fit the body with the barrel perfectly, and i saw in youtube once how to mold your stock to fit your barrel, using casting material and paper to cover your barrel , sadly i think the video has been removed. And the last thing probably don't rush your work, it take some serius time to sand off the stock. Good luck on your project.

 

[headshot06]

@teufelhunden: i use krylon spray paint, the od and tan, to seal the wood i use sanpolac. You could find other brands with this kind of material in every home depot.