Airsoft Sniper Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
When i pull back the piston to cock the gun, it cocks normally, but when i try to push the piston forward to it's original position, the gun fires automatically.
The Rifle is old, which has me thinking it's probably a used up part that needs to be replaced. But i don't know which part.
Thank you for helping :)
 

· Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
I took it apart, and found that the whole trigger box was wobbly, so i tightened it and it seems to work normally now.
I also opened the trigger box and took a look in there and all the components show little to no wear, just some scraped off paint.
So i hope this was the only issue, if not I might just upgrade the internals, since they are still the stock ones.
Thank you for helping :)
 
1 - 3 of 3 Posts
Top