Airsoft Sniper Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
I put the 190 spring in my VSR, and made some additional tweeks.. and I couldn't believe my eyes when I crono'd it.. (course I was using a Madbull; which reads low)

With .43 I averaged about 485-490 Hit 495 once
With .36 I averaged about 505
With .29 I averaged about 585
With .25 I averaged about 625

It's going to be GANGSTER..
 

·
Registered
Joined
·
346 Posts
People underestimate the effect of proper airseal on higher-powered rifles. You'll lose easily 15-20% of the fps from the spring if you don't have the right tweaks done. teflon tape, anti blowby rings, and correct o-ring seal with the hop up unit come to mind. Based on that fps, looks to me like you got all of the right "tweaks" done! ;)

Just make sure not to use that on a field!
 

·
Registered
Joined
·
3,788 Posts
I can honestly say that I do use the rifle with 75-100 fps MED.. That and I ended up switching to my Madbull .40's. So that dropped it down a bit, but still had the punch so to say. I talked to my guys I play with and they were all ok with it.

They know how I play and that I am responsible. That and I had my side arm with me so no close shots.

And yes I know .... that is to hot to play...... maybe in your areas... but my guys said it would be ok
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top