Airsoft Sniper Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello all,
i am new to building rifles and all, but i am starting with building off my Mk12 Mod 0, and i was hoping for some input about whether or not the following parts are decent or not. Thanks :tup:

Parts:
1. http://www.evike.com/product_info.php?products_id=24409
2. http://www.evike.com/product_info.php?products_id=31458
3. http://www.evike.com/product_info.php?products_id=31761
4. http://www.evike.com/product_info.php?products_id=29122
5. http://www.evike.com/product_info.php?products_id=37581
6. http://www.evike.com/product_info.php?products_id=37454

I would love some help with this thanks.
 

·
Premium Member
Joined
·
2,311 Posts
If it was me I would focus on the internals first, then worry about the externals later. Since that is the case, I would spend the money on a Prometheus 6.03 inner barrel, an ER-hop (there are tons of people who can install this for you if you can't, click on my sig), siegetek gears and a TerminusX motor. Make sure your GB is in good working order, and then worry about what it looks like on the outside. For the spring, prometheus, PDI, guarder make good springs.

Generally speaking, systema and matrix parts are crap.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
For now I'm am looking at externals. Thank you for the Recommendations for who to buy from though as far as internals and stuff. One quick question though, if i get a M125 spring, do i need to upgrade the gearbox if my gun currently runs a M120? I am also adding a SOPMOD stock from echo 1. Also, do you guys know anyone in central florida who may be able to do internals uprgades, from simple to full uprgrades?
Thanks any other advice would be great. I will post photos of my rifle as it is now, then as i acquire the parts above
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top