Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi guys,
I got the Omega Zero 90° trigger, and the cylinder heads included do not fit in my stock cylinder. I have a JG Bar 10, does anybody know the thread specifications on the cylinder head? I want to thread the cylinder maybe a quarter of an inch deeper. That should fix fitment issues. Thanks ;)
 

·
Registered
Octavia VRS
Joined
·
90 Posts
I had similar issues with a Maruzen Type 96.
The Cylinder Head may be for the stock Marui Cylinder and the thread spacing may be missmatched.
I had it happen where I bought an Airsoft Pro Cylinder Head for my Laylax Teflon Cylinder and it wouldn't thread on.

You may need to buy a matching Angel Customs Cylinder or other after market cylinder.
However, a lot of folks will tell you to buy the matching cylidner to cylinder head to reduce the risk of these issues happening.

Hope this helps somewhat pal.

(also, first post, do an intro post mate ;) )
 
1 - 2 of 2 Posts
Top