Airsoft Sniper Forum banner

DAM! stock vsr problems

1293 Views 4 Replies 3 Participants Last post by  whisper
:'( I got my new tm Vsr-10 yesterday and after shooting a target for a while the bolt won't go in. When I pull the bolt and press the trigger the bolt moves foward but does not fire. I tried using the unjamming rod but it keeps getting stopped by somthing (not a bb) and won't work. The bolt won't go in, and I don't want to break it so I don't push it in hard. Thank you if you could help me out.
1 - 5 of 5 Posts
No offense, but I have no idea what you are talking about. Have you taken it apart yet?
Sorry, no, I have not taken it apart yet because I'm not that experienced. I plan to install upgrades in the near future.
First of all, you are going to have to take it apart at some point, so if I were you I would go ahead and see if there is anything wrong in with the inside. There are some great disassembly videos on youtube. There are four really great videos 2 down from the top of the list if you search: JG BAR-10 disassembly
I pretty sure it has something to do with your spring guide stopper . It may need to be pulled out a little bit until the gun "wears in."
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top