Airsoft Sniper Forum banner

Decision Again.=(

2478 Views 21 Replies 4 Participants Last post by  nelsonho396
So Hi forum I`m back Mr.Confused about everything.
I am deciding to sell all of my gun. I know you don`t want to know that so lets continue.
Which should I get again
G&P M16VN By now you should all know what it is.
Some Systema Compression parts. Such as cylinder head and air nozzle
Guarder Full Cylinder
A Madbull 6.03 455mm Because I heard that is the magic number.(correct me if I am wrong.)
A systema hop up bucking. A echo 1 H nub. I`ll get a SCS nub if I don`t like it.
A Azuimuth piston(blue piston thingy)
A Aim silent piston head
M125 spring
Yes I know a carry handle scope mount.

Here is my other option. I like it because of Profalconey
A&K Svd $138
Steel piston catch or sear. 30 dollars
A piston that uses aeg piston heads.(30) 9d6284110
A madbull 6.03 590mm tightbore.
A Guarder Black 70 bucking.
A side scope mount. ( Comment if you know what scope mounts fit and which don`t)
A Tasco 3-9x 30 supply by Walmart.
A polishing resin(Got to go find one)
A Drill to drill the hop up to prevent double feeding.
M170 Spring
25 percent off. For some items because of Black Friday soon to come.
Same with M16 up there.

Thank you for reading this. I know it is a pain to read.
Anything to add feel free.

Forgot to add I am going for range and accuracy. ROF doesn't matter. I will have support gunners. I just need to hit the guy before I get into his/her range. Hencing it is a standard aeg and not a counter sniper.
See less See more
1 - 6 of 22 Posts
nelsonho396 said:
...super nine...
It was a joke, it is a hard comparison because they are completely different guns. If you want something with rapid fire that will look sexy and veitnamish get the m16 while if you want something that will look sexy and vietnamish get the SVD. Lol it is a hard one.

But personally if I were to spend money on a gun at the moment I'd get an AEG. I'd get the m16. If I were to get an SVD it would have to be the real sword. So get the m16 if you want cause it is a gun that you can use all round and Change to a DMR if you want.
Again the G&P. And I didn't give ant negative karma in fact I'll give you some positive now.

Battery - TBB 35-60$ then bucking then get a new motor (JG). Then a new stronger spring, SHS gears and a metal tooth piston and maybe an aluminium dual o-ring piston head - then a POM oring nozzle and maybe a LIPO if you wanted, I wouldn't bother though. And maybe reinforce the gearbox too with putty or something- (After the spring of course)
Nah I just like nam style so do whatever you want. The putty isn't really necessary unless you are at the 550 mark and are using a stock box. It will work fine with it but it will work even better with the putty, as in consistency. On ebay a new nozzle is like 10 bucks. You can just get a cheap scope and scrap the carry handle thing but If I were you I'd get a hot looking one like this - g

Make sure the motor is a JG high torque - like labelled as such.
Get a soft rubber too because they are more consistent and don't have a break in period.
Get their 455 or smaller because for an AEG which has a smaller cylinder the ratio is different so their barrels must be shorter to keep it and to have a better shooting gun, remember longer is not better in terms or accuracy.

OH and you can get a piston body with a few metal teeth - (lighter and faster) or one with full metal teeth off of ebay and such for like $13.

BAttery wise I'd either go Lipo (Well I wouldn't but most would) - or get a nice 9.6 or 11.4 v battery that'll fit into the solid stock.

Now remember these are just my personal opinions so just go with what you want but I will say again that soft rubbers are ALWAYS a better option even if you have to replace them more.

The dual o ring piston head is actually pretty rare so if I were you I'd get something like this only I might get a better set - l
See less See more
The JG motor is definitely strong enough, people pull over 550 with them. Also it depends I forgot how long m16 barrels are so just get close to the stock barrel length I suppose, but again I'd put in a slightly shorter one. Lipo wise you don't need an 11.1, a 9.6v lipo is enough. I would get the SHS gears and a piston, piston head and cylinder of my choice over that package so yeah I would drop it.
That sounds fine besides the lipo IMO, your decision though.
1 - 6 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.