Airsoft Sniper Forum banner
1 - 2 of 2 Posts

· Registered
3,718 Posts
You're in luck, I have!!!!!

I made one based off the principle of this

To trigger it, I used a Clippard MJV-03(you have to make sure it's 03) push button valve, and I used cheap 4mm line and fittings.
In total, it was like $35 to build, and capable of very high power, and it worked very well.
I can't remember why I took it out, but I guess I did for some reason.

I can draw a diagram of what I did if you like, if you would like to try and make one.


1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.