Airsoft Sniper Forum banner

DIY killflash for eotech, new idea

5087 Views 8 Replies 6 Participants Last post by  airsoftmaniacman
I've used my EOTech replica reddot for a year now, it works great but one problem, its a bloody mirror. I stand out like a flashlight from the surrounding which isn't great when you want to hide. It's like holding a orange sign "Here I am!". Reddots use a reflective surface, real holographic sights don't. You can see this if you compare the brightness within a real holographic sight and a reddot, the reddot glass is darker whilst the real holographic glass is completely transparent. The other problem is that the surface of the front glass of reddots are convex, so all light is reflected in all directions. This makes you stand out in almost all directions.

The phone is reflecting off the scope, see what I mean?

Killflashes are often the solution, it works great on real scopes but with a mirror surface they don't do much. Sunshades help aswell but not much. The current airsoft killflashes for holographic replicas are rubbish, the ones out there are 3 layers of metal mesh, like the one in mesh goggles. The idea is great but in practice they often become misaligned so you see nothing. That would be if you even saw anything from the beginning and still the mirror shines through, so they see you and you see nothing.

So how do you get rid of this mirror surface? I thought back to my photography days and fishing days. You had polarised glass to remove the sunlight bouncing of water. And there's the solution: polarised glass. You can get this when you watch a 3D movie at the cinema.

Use the reddot front glass as a reference to cut out a piece of the plastic about the size of the front.

Fine tune the edges with a scissor to mount it inside the front frame. Mount by pressing the edges in and with the correct side, the one with which removes the reflection


Tacticool :) Looks like a real holo except a bit darker. Its a compromise if you don't want to pay 500$ for a real one. You still get some reflection but it's not much compared to before.

As always, do this at your own risk - use some hot glue on a stick to remove it if you need to.

Cheers :cheers:

Note: This doesn't protect your reddot at all!! It just reduces the mirror surface. If you want to protect it use plexi/acryllic glass (or metal mesh)
See less See more
  • Like
Reactions: 3
1 - 9 of 9 Posts
This is an incredible idea! I assume they won't provide any BB protection though unless you put down multiple layers on the front.

I assume you place a layer on the front to reduce the glare being spotted by another player and a layer on the back side to reduce your glare?

In theory, couldn't these also potentially nullify your red dot if you orient them to cancel out the projected laser sight?
Great Idea Man!! this I am sure will help with the Mirror affect of reflex sight's but I do have to agree with Maniac, wouldn't the BB's still damage the sight? unless you put on several layers but wouldn't make it to dark to operate with? Still very nice job!
I tried this a while back when I ran an eotech on my polar star, only issue is seeing bbs, even white ones at certain distances.
I went to home depot or maybe a local hardware store will have them, but I used a plexi glass sheet I believe, or some other hard clear plastic and cut it out then shaped it with a grinder to work, then finished it off with some sand paper and that worked well.
@airsoftmaniacman and @TheRussianSniper - The polarising glass doesn't protect at all. If you've got these types of polarising glasses you see that the plastic is soft and really thin. I use a piece of plexiglass in the old rubber EOtech cover, the one that came with the meshes. You do need protection for the reddot. I've already lost 2 pieces of plexi to bullets, thankfully not the reddot.

I don't have any polarised glass on the back. You shouldn't really have two polarising sheets because you might get the polarising effect in both directions of the light --> total darkness. Experiment with two sheets and see what I mean. @Tupp9 Adding just one polarising sheet does make it darker but its better than having "killflash" meshes which makes it more difficult to see the bullets.

As for nullifying the reddot, I still see mine clearly. I don't think it has an effect because the light inside the reddot bounces internally.
See less See more
It's pricey.
And I'm not sure if real EOTECH will survive after hit.
I can find no evidence of it being an original eotech. No press release or news on the original eotech page?

Sendt fra min Galaxy Nexus med Tapatalk
Hm... by the way... it looks like it some fake.
Fake sight, fake site, and strange user who posted the link.
Why don't you go to get the official licensed Eotech for airsoft series at EOTECH L3 for Airsoft It's much better than those fake one.
He is a spammer. L3 Communications has not authorized any companies to create an officially licensed EOTech replica. Thus, the website is illegally attempting to create a false connection to the real L3 company.

The EOTech he linked to is as cheap and poorly made as every other replica EOTech. If anything, it is overpriced since it is not a Hurricane replica.
  • Like
Reactions: 1
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.