Airsoft Sniper Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
3,788 Posts
BE VERY CAREFULL ABOUT WHAT YOU PUT OT MAKE A SUPPRESOR.... THEY CAN AND HAVE BEEN USED TO FILE SUITS AGAINST PEOPLE BY THE ATF.

Yes it can be done, but I don't want to see anyone in trouble. Trust me it is a pain to get the $200 tax stamp for one already.... going through it right now.
 

·
Registered
Joined
·
3,788 Posts
It isn't to hard to to, just think about it and you can figure it out.

There was a group in my area that had this happen to them to be honest. A kid was offering to make them for his friends, and a neighbor or someone saw him out in his yard "testing" the products. His parents are now faced with a $10,000 fine, they were lucky that they didn't have to do jail time.

And yes I know that you were talking about an airsoft suppressor. But in the eyes of the BATF if they are not solid they are illegal. Even if they have foam in them, as long as they will drop the noise by 1db then it is classified as a Class 3 weapon.


Now I know just about all of us have them on our rifles, and have made them. But this really isn't the place to be making a "how to". The forum doesn't need that kind of attention in my eyes.

There are plenty of other places to go and see how it is done. That and there was already one put on here by the founder of the site, so just go off of that and it will give you an idea on how to do it. No need to have everyone putting up there "design" on the forum.


Now I know that is just going to go over a lot of peoples heads, but hey if you get caught don't whine about it. You knew before you made the product what the consequences could be.
 

·
Registered
Joined
·
3,788 Posts
[quote author=aaron2269 board=general thread=1797 post=13873 time=1283220671]Could someone put an internal suppressor in the barrel. like shorten the inner barrel about an inch and use that space. Then your airsoft gun would be a little more silent, and no one would ask questions. And a lot of .22s have these built in and they're not considered class 3 weapons.quote]

Yes it is ;) Trust me, been doing alot of research before I went through all the paper work to get my suppressor. Anything that can fit over the barrel of a firearm and can reduce the noise by 1db is considered a suppressor. Now if it fits over the entire barrel, then yes it is still a suppressor. If it goes just at the end, yes still a suppressor.

Please do some research before you say something like that man. I have fired a lot of different weapons with and with out suppressors, both intrigal as well as removable.

Heck if you wanna make one make one... just don't make a step by step. Show the parts mid completed, then completed. And if anyone has questions or anything about the process take it to pm, just to be sure that noone gets into trouble.
 

·
Registered
Joined
·
3,788 Posts
True it will work, I have done this a few times to be honest.

I just didn't want any undo attention brought to the site and ruin it for all of us. But yeah there are ways to do it if you know how. All it takes is an understanding of how a suppressor works and how they are made. You then can apply this to your airsoft rifle fairly easy.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top