Airsoft Sniper Forum banner

DMR Buidling - Help Needed

4539 Views 40 Replies 10 Participants Last post by  uller
OK guys.. I just bought an DMR for like 250euros ~ 350 $ . I bought it from my friend which did some upgrades. But Off course thats not all so I am asking you all know.. Here is the "Config"

A&K SR - 25 Full Metal
5KU Air Seal Nozzle for SR-25 series AEG
SR25 Extensive Tappet Plate
Element Hop Up Cushion for AEG
Lonex Hop Up Rubber (70 degrees)
Modify Spring - S150+
Battery 9.6 V ; 4200 mAh ; Dean Conectors
I have optic so thats not needed.

All othes is STOCK !

So it has about 450~500 FPS

Now I am wondering what else should I upgrade ? Or what to change ? And off course I am interesting in current condition,with BB-s . Shall I use 0.36g or 0.43g for this configuration. Off course when I choose to upgrade more I will use 0.43 g for best performance.

In my country its allowed ~505fps and only semi -auto. So take care of that when you put some tips or anything else.
Please give me some advice because I am new in sniper world :)

And off course,from DMR I want RANGE as primary role . If you know what I mean :) Thx !
1 - 1 of 41 Posts
Metallica, almost every time you post, you have a very disrespectful tone. Not sure if that is what you are going for, but that is the way most of the members here are taking it. There is no harm in asking for advice. The OP clearly took some time to read through things and even came up with a parts list. He is simply asking for advice as to whether he should add anything or get rid of somethings listed above.

It is one thing when the OP asks a question, "what should I upgrade?" while doing no work at all. HOWEVER, that is not the case here. We have some guys here who know their shit, and you are one of them. But if you are not going to help out, don't bother posting. Consider this your friendly reminder.
1 - 1 of 41 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.