Airsoft Sniper Forum banner

DMR picture thread

170232 Views 422 Replies 161 Participants Last post by  Wolfgeorge
Post pictures of your SEMI-AUTO sniper rifles please. This is a picture only thread, so no discussion just pictures :)
1 - 7 of 423 Posts
Been a long time but i finally broke down and could not resist the bug any longer.

KWA Sr12, KA Mk3 leupold w/A1 turrets, AMP PEQ15, UTG harris style Bi-Pod, KAC VFG, VFC AAC compensator(face fucker). Internally its pretty much stock. Typical engagement distance is 100-200ft, 10/10 hits. At 250ft i'm shooting roughly 5/10 and I have gone as far as 290ft. Shoots 393 on the nose and I use KSC/KWA .3 bb's in her right now. I may run a new barrel in her pretty soon, but for a stock rifle in the 400fps range she shoots like a laser.



sticks
See less See more
The PEQ serves a purpose though. Occasionally I have to transition from the wood line to the "towns" that are scattered across the fields here. The Peq is zero'd at 15-ft so I can clear a building and have some point of reference for my BB's.

sticks
All good man. The peq also has a working flashlight. I want to mod it to have a green laser like the real ones.

Sticks
Rattle canned her, dropped the VFG and replaced with XTM panels. I need to paint the XTM's still but you guys get the idea.



sticks
See less See more


-Lm4 PTR
-Magpul moe stock
-Kwa sr series iron sights
-KA Mk4 scope
-Bravo #40 SPR rings
-Madbull Troy TRX 13" RIS
-LaRue Handstop
-UTG Harris style bi-pod
-Madbull Surefire 6in QD supressor and flash hider
-G&P 2 point bungie

Km head LM4 barrel and mk4 short dot replica with LaRue 1.5 SPR mount are both in the mail. The bipod is getting stripped of its paint soon. Internally this thing is stock. I've been running for over 6 months now, with .3's I can consistently hit people out at 250ft. Whats amazing is everyone who borrows it can also hit people at the range :D. The new KM head barrel are apparently machined in a zero vibration machine, giving them the "most consistent bore" and a $90 price tag. Once the barrel has run through a game I'm going to try the RA tech NPAS and the new buckings on the market. My goal is 350ft man sized target at 450FPS with .2 without any home made mods.

sticks
See less See more
  • Like
Reactions: 1
Milo: I was talking about the FPS with a .2, as thats the weight for measurement here in ohio. I use ksc .3's right now, may upgrade to something heavier with this barrel. I should have the new scope this monday as well ;).

Wolf: pretty consistent for a GBBR, 10 FPS variance on worthington brand propane with freshly lubricated magazines typically. I received the rifle shortly after the summer, but so far the testing has gone great. Each magazine hold 1.3oz of propane, which is 1/6th of a green gas can and 1/12th of a propane can. Coldest temp I have played in was 24*F, I had to refill the propane after about 3-3.5 reloads in each mag. Thats roughly 120 shots per propane fill. I'm heading out to a 24 hour game here in February, which will complete my winter testing. Expected temps will drop to the teens. I would expect only a single mag out of one gas fill, however its performance in the 20* range really surprised me.

Recoil: consistency for me is 5/10 shots, at 200ft I can hit 10/10 barring weather conditions of coarse. Hopefully this km head tight bore will push the ranges a bit farther, 220ft seems to be the "breaking" point as far as accuracy. I have not done any paper testing on it yet. There have also been some very lucky shots taken with her. I will say that I may have lucked out with the hop-up, some people have had terrible experiences with their hops. I do know that KWA markets this gun to be used with a .25, which IMO is like shooting a .12 out of an AEG. To get really consistent you need to shoot at least a .3, a .36 or .4 would be best. I also have seen some very mild power creep with this rifle on propane. It does shoot the .3's a little faster than the .2's. Not too sure how that affects the hop.

Glad you guys like it, next lm4 may turn into a Mk12Mod0 if I can find the parts in stock!

sticks
See less See more
Checking back in for a bit, glad to see the forum still kicking! This is the latest evolution of my Lm4. I tried to build a Mk12modH, however I can't source the correct optic anymore. The Offset mount and RMR are recent additions. Excuse the crappy photo; I was in a slight rush this morning.

See less See more
  • Like
Reactions: 5
1 - 7 of 423 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top