Joined
·
2,180 Posts
I beleive the zero trigger is ojly compatible with modding and it works with laylax parts. I would get the new trigger for
Posts by inthetallgrass
1 - 5 of 15 Posts
Joined
·
2,180 Posts
[quote="joshh1512":q740armn]Thanks for the help grass!
Right, so you say over 03, and under 05, so would you suggest the .04 being the perfect barrel to choose?
How does the zerotrigger compare to the vtrigger (doesn't the zero have the lightest pull, whereas the v makes the bolt pull easier?) I also had a look for the one you suggested on redwolf, but can't seem to find it, what make/model is it? A link would be great!
You say the precision cylinder is best for smoothness, isn't the palsonite even better? Also, why go for the raven cylinder, isn't it going to be basically the same as the stock cylinder?
What is the need in making an 'over the barrel MOCK silencer'? Simply to reduce the noise...?
And you see use power adjusters, I looked at those but couldn't understand, do they increase or decrease power? And which spring should I go for, there's either the 'APS240' which is suggested to give 430fps, and then the 'spr250%' which is suggested to give 530fps.
I'm thinking it may be best to just get the pdi cylinder set, should i go for VC or HD?
And cool, pdi bucking sounds good, why will I need 2 and a hop repair kit, do they break easily? And will the high arm give better results than normal?
Oh and one more thing, on the xfire website, I saw for sale they have 'y-rings' to replace orings on the piston or cylinder, apparently they make the bolt pull smoother, they're only sub
Right, so you say over 03, and under 05, so would you suggest the .04 being the perfect barrel to choose?
How does the zerotrigger compare to the vtrigger (doesn't the zero have the lightest pull, whereas the v makes the bolt pull easier?) I also had a look for the one you suggested on redwolf, but can't seem to find it, what make/model is it? A link would be great!
You say the precision cylinder is best for smoothness, isn't the palsonite even better? Also, why go for the raven cylinder, isn't it going to be basically the same as the stock cylinder?
What is the need in making an 'over the barrel MOCK silencer'? Simply to reduce the noise...?
And you see use power adjusters, I looked at those but couldn't understand, do they increase or decrease power? And which spring should I go for, there's either the 'APS240' which is suggested to give 430fps, and then the 'spr250%' which is suggested to give 530fps.
I'm thinking it may be best to just get the pdi cylinder set, should i go for VC or HD?
And cool, pdi bucking sounds good, why will I need 2 and a hop repair kit, do they break easily? And will the high arm give better results than normal?
Oh and one more thing, on the xfire website, I saw for sale they have 'y-rings' to replace orings on the piston or cylinder, apparently they make the bolt pull smoother, they're only sub
Joined
·
2,180 Posts
Yes the polarstar pistons are better, I just love PDI for some reason
The zerotrigger has an amazing triggerpull but it wouldn't be as reliable as the other two - (Judging from the way people talk about it and the obviously more complex design)
Also with the PDI chamber the w-hold bucking is the best trust me - with one and low hop up arms, for the laugh I zeroed in .4g BB's at like 135ft. and it was dead accurate, the only thing is it was travelling at like 10fps when it got there so you wouldn't feel it or hard it, and any wind would affect it.
The PDI hop up with the w-hold bucking IMO is an amazing combo. This was with like a 1 joule gun.
The PDI springs are supposed to be the best springs on the market too aren't they? Gaurders are v.good in AEG's I think.
And yeah, it is not that necessary to change the cylinder but TBH I would for a black one which is smoother, quieter and cooler any day. But I'd get the raven and save myself money, that cheap trigger I mentioned was tested at 670fps setup for like 6 months so I'd prefer to spend $80 over $150 any day on something that'll do the same thing.
The zerotrigger has an amazing triggerpull but it wouldn't be as reliable as the other two - (Judging from the way people talk about it and the obviously more complex design)
Also with the PDI chamber the w-hold bucking is the best trust me - with one and low hop up arms, for the laugh I zeroed in .4g BB's at like 135ft. and it was dead accurate, the only thing is it was travelling at like 10fps when it got there so you wouldn't feel it or hard it, and any wind would affect it.
The PDI hop up with the w-hold bucking IMO is an amazing combo. This was with like a 1 joule gun.
The PDI springs are supposed to be the best springs on the market too aren't they? Gaurders are v.good in AEG's I think.
And yeah, it is not that necessary to change the cylinder but TBH I would for a black one which is smoother, quieter and cooler any day. But I'd get the raven and save myself money, that cheap trigger I mentioned was tested at 670fps setup for like 6 months so I'd prefer to spend $80 over $150 any day on something that'll do the same thing.
Joined
·
2,180 Posts
I said get the cheap on if you can. If not IMO I'd gdt the v trigger.
Joined
·
2,180 Posts
Yes that is correct. You can get a Pdi cylinder. And use laylax parts with the zero trigger. But not pdijoshh1512 said:
1 - 5 of 15 Posts
