Double eagle m66 pro 700. Upgrades.
1 - 9 of 9 Posts
Joined
·
3,876 Posts
I'm pretty sure it's at least half VSR-10 compatible, so I'd look at the pinned VSR-10 threads in the VSR-10 section.
Joined
·
2 Posts
Okay thanks I’ll check it out now
Joined
·
633 Posts
I think I read it uses the marui M40 system not vsr. (Yes I get rubbers & barrel are the same) but rest is M40 based to some degree
Joined
·
3,876 Posts
Good to know, I guess I was wrong a bit.
Action Army has parts, maybe EdGi, but for $260 I imagine it's at least somewhat decent.
Action Army has parts, maybe EdGi, but for $260 I imagine it's at least somewhat decent.
Joined
·
633 Posts
Sniper mechanic has a bit of info of the M40 platform, thier is also a thread on here about it.
From memory due to the small cylinder volume of the M40 system around 60-70m is the most you should aim for with spring based upgrade parts, if you want more need to hpa.
Search this forum for threads on the M40 system.
From memory due to the small cylinder volume of the M40 system around 60-70m is the most you should aim for with spring based upgrade parts, if you want more need to hpa.
Search this forum for threads on the M40 system.
Joined
·
799 Posts
Me sad when my post has not been read nor remembered
www.airsoftsniperforum.com
Everything else is pretty much its own spec and cannot be upgraded
Double Eagle M66 / M700 PRO unboxing
(I do not own the rifle nor the original script of this unboxing review - all rights belong to a friend of mine called Dave) Unboxing The gun comes packaged inside a simplistic brown card box. This card box also comes with a carrying handle which, unlike some other brands, is sturdy and...
www.airsoftsniperforum.com
The standard Marui uses standard VSR rubbers, but the barrel is proprietary to a degree (it has specific cutouts for stabilization in the chamber) and one of the fitting rings cannot be installed if a standard VSR barrel is used
Everything else is pretty much its own spec and cannot be upgraded
1 - 9 of 9 Posts
