Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,045 Posts
Its basically a Well Warrior Mk1. I had one for a while, and to be honest not my best purchase choice, but I wanted an L96 ( hell I'm English after all ;)) I managed to fit some but not all of my upgrade parts in to it from my Classic Army M24. Some of them required a bit of engineering work to get to fit right some just fitted straight in and some didn't fit at all ::). In the end I played with it twice before I striped all the parts out of it and converted it into a stock for my VSR. Much better gun all round now


My advise....By a BAR 10 if your on a low budget, much better gun with superior performance and upgradeability. Don't just by the gun because it looks like an L96 and then struggle to get it to perform as good as it looks ;)
 

·
Registered
Joined
·
1,045 Posts
To be honest mate, if your going to get all that lot custom made on a one off basis, its probably going to end up cheaper if you invest your cash in a high end L96 straight off, rather than upgrade a poor one with custom parts, as anyone who has built anything custom will tell you, things that in theory and on paper should work, quite often in practice either don't or not to the level you envisaged ;)

If you must have this rifle, why not do a Google search on the Well Warrior and see what parts can be upgraded from already available aftermarket parts, it'll end up cheaper and also it means someone somewhere has already tested it to see if it fits and works :)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top