Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
66 Posts
Do not just slap in a stronger spring without the reinfroced steel piston catch and shimming the trigger assembly. The problem is that the the assembly is made of cheap pot metal. Shimming it will remove the wobble and with little lithium grease, will make pulling the trigger much smoother.
 

·
Registered
Joined
·
66 Posts
The sear is some cheap pot metal. I own the very first version of this gun and the piston catch was terrible.

For trigger shims, you can use regular small washers. I will try ti find my old trigger assembly and post a picture of it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top