Joined
·
2,893 Posts
I would suggest the TDC mod even if you didn't have the right hook issue. You are only drilling into the outer barrel so even if you somehow mess up, which is very hard to do, it won't affect performance at all and you can always plug it up with some j-b weld stick. I'm not sure if it would help your case though because if you are able to adjust the arms left to right already, then the TDC leveling the arm wouldn't do too much.
It sounds to me your bucking mound is off center. Take your gun apart and reposition the bucking so it is either sitting dead straight or even slightly turned to the left to compensate for the right hook. You might have installed the bucking so it's turned to the right, which would cause the right hook.
It sounds to me your bucking mound is off center. Take your gun apart and reposition the bucking so it is either sitting dead straight or even slightly turned to the left to compensate for the right hook. You might have installed the bucking so it's turned to the right, which would cause the right hook.
