Airsoft Sniper Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
100 Posts
Discussion Starter · #1 ·
Does anyone know if the Echo 1 M28 mags are compatible with the M24? They look damn close to the same. If they are this would be a great thing as the M28 mags come in metal.
 

·
Registered
Joined
·
13 Posts
I remember trying them once, and found that they did not work in my rifle. Then again, my chamber at the time kept sliding forward and making all of my mags a very tight fit, so it's likely that it might have just been that problem that was causing the incompatibility. I only remember having to use a mini screwdriver to pry out the M28 mag after I tried to fit it in the CA.
 

·
Registered
Joined
·
228 Posts
I own both M28 and CA M24. The M28 uses a single stack feeding similar to a M4 mag. The M28 mags feeds so nice and after the last shot, I can chamber the bolt without slamming into the follower which my CA M24 has broken several M24 followers from it.

And if you could find M28 metal ones, the only thing metal would be the outer shell only.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top