Airsoft Sniper Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
405 Posts
Discussion Starter · #1 ·
Hi guys, how can I have better gas efficiency with my glock, ( more shots, more fps consistency), what parts I have to change to do that?
 

·
Registered
Joined
·
167 Posts
Oh my, where to start. Use maple leaf autobot bucking with c ring for better nozzle seal but that depends if you can use it (what brand is that glock?). You need weaker recoil spring, lighter nozzle valve and spring. Also a lighter slide will help a lot. Do not use hi flow release valves.
 

·
Registered
Joined
·
405 Posts
Discussion Starter · #4 · (Edited)
Lol!, the glock is the King Arms g17 TM clone, and the only thing that I have change is the bucking, the PDI W syle
The slide is made of alumunum, really light weight But the bbu is heavy
 

·
Registered
Joined
·
451 Posts
Does it have issues not emptying the mag of bbs on one charge? On a ~20c day you should get 2 mags worth of bbs. If you’re getting that not much else to do imho... I have crap load of mags (7x extended, 10+ regular), only look for 1 mag per charge and recharge when I refill between matches or carry gas on the field.
 

·
Registered
Joined
·
405 Posts
Discussion Starter · #6 ·
Does it have issues not emptying the mag of bbs on one charge? On a ~20c day you should get 2 mags worth of bbs. If you're getting that not much else to do imho... I have crap load of mags (7x extended, 10+ regular), only look for 1 mag per charge and recharge when I refill between matches or carry gas on the field.
Umm... I didn't do that test, I will do it tomorrow, But, what I realise is that the magazine some times when I fill it, that sounds of the liquid gas passing through the bottle to the mag is short and others is more longer
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top