Airsoft Sniper Forum banner

EMG/ARES EV-01 Build Thread

1945 Views 17 Replies 6 Participants Last post by  LegendaryTurtle
So I decided to try out this Striker/M40 mashup cause it looks cool and simply for the upgradeability and parts selection since I've already built a VSR platform previously. It's definitely a solid made rifle and is a Striker AS-02 w/ an M40 Chassis.... First, I love the unique trigger guard safety and stock TDC Hop adjuster!!! Second, it's not something that EVERYONE has... Its "different"...

Now... Pros:
Weight is pretty good and it's VERY durable!
Trigger guard safety
TDC Hop up adjustment
Obvious Striker series Pros out of the box
Dead on up to 125ft/38m... Lol.
Not very consistent in accuracy or range with BBs over .25/.28

I Just ordered
Action Army Hopup Chamber
Maple Leaf Autobot 60° bucking (silicone)
Action Army AS-02 Hop Adjustment Wheel
Action Army M140 Spring
(Forgot to order barrel spacers... Doh!)

I truly believe that I should be getting great range and consistency with my stock sear/trigger box while shooting .36g BBs. Eventually I'll be down sizing both barrels and running a suppressor.
Stock barrel length is 545mm-550mm
Want to run
310mm short outer barrel
150ish mm suppressor
450ish mm 6.01 TB inner barrel

I am completely open to advice and ideas on having a great performing Striker series Sniper/Scout rifle!!!

P.S. my sling loop broke so Yes... I used a key ring hahaha
Wood Gas Machine Electronic instrument Audio equipment
Air gun Trigger Wood Shotgun Bumper
Machine gun Air gun Trigger Urban design Engineering


See less See more
1 - 3 of 18 Posts
I'm sure it is Hicapa by Vorsk. Googled about it but most said that it is something like WE. Cool but bad internals. Unfortunately.
Definitely a Vorsk.
UK shops have been massively pushing Vorsk for the past couple of years (especially Patrolbase). The thing is that Vorsk is just Nuprol reskinned- I'm 99% sure they just use the same manufacturing facilities as the 'Raven' brand of pistols. Similar to Raven, they look cool but their internals are complete trash.
I once set my eyes to Vorsk Titan because it looks sick but then when I heard about the internal I could hear my dream crumbles lol so now I made myself a custom Hicapa 8.5 inch but it's as hideous as possible. Gonna redo it one day
You can buy the Vorsk slides separately for like £35. Biggest issue is that they are made of crappy pot metal.
I picked up the VORSK HI-CAPA in the picture at my local field But they are more prominent in Europe... Unless the field got them from Europe too? 🤷‍♂️
Evike sells them.
1 - 3 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.